This section deals with disabled and handicapped parking signs. Also listed is State specific signs for AL, AR, CA, CT, FL, GA, HA, MA, MN, MO, NV, NJ, NC, PA, TX, VA, WA, and WI. These signs are engineer grade prismatic on .080" rustproof aluminum which meet State & Federal MUTCD guidelines. Engineer grade prismatic (EGP) offers superior daytime and nighttime brightness compared to standard EG. High quality and rated for seven years. Beware of the cheaper brands which fade in direct sunlight after 2 years of use. Click the pictures below for detailed descriptions and quantity discounts starting at 5 signs.
What is engineer grade prismatic reflective disabled signs? These signs are .080 inch thick flat aluminum with 3M's new prismatic engineer grade reflective sheeting applied over the surface, the lettering and background is reflective. Engineer grade prismatic (EGP) offers superior daytime and nighttime brightness compared to standard EG with beaded optics. Reliable and proven prismatic reflective technology from 3M. Signs will never rust and normally have an average life span of 7 years. High quality materials result in longer lasting signs and excellent resistance to fading. Beware of any brands thinner then .080", (.040 or .063) can be easily bent by vandals. Exceeds ASTM D4956 type I specification.
Additional Information Comes with standard mounting holes centered top and bottom for easy installations. They accept 5/16" bolts and nuts and a standard length to use is 2 1/2" which may be purchased in our hardware section. Typically installed on U-channel or square posts which may be purchased in our post section. Please refer to the MUTCD which gives examples of how high the handicapped signs should be.